Skip to content

Fire-rated hedges and living walls

For greenery that has to clear a fire marshal or a plan reviewer.

Standard foliage is UV-stabilized for outdoor sun. Fire-rated foliage (NFPA 701) is an upgrade at extra cost, with documentation on request. More foliage is available on request; fire documentation depends on the product.

Who decides

What we specify, and who approves it.

Specification

Standard
NFPA 701: Standard Methods of Fire Tests for Flame Propagation of Textiles and Films.
Foliage

Not in the library:

Product
Boxwood, classic hedge. One of the nine mats in our library.
Rating
UV-stabilized as standard. Fire-rated (NFPA 701) is an upgrade at extra cost: tell us the mat and we will say plainly whether it comes fire-rated.
Documents
For fire-rated foliage: the documentation is available on request. Samples on request.
Installed by
Geranium Street USA, Inc., CSLB #955154.
A sample of the Boxwood foliage mat, classic hedge

Review

The authority having jurisdiction decides, for your address and placement. We provide the documentation on request; we never promise approval.

Who does what.

We specify and document. You, or your architect, confirm where the rules apply. The authority having jurisdiction decides.

Who does what, from the specification to the decision
TaskCalifauxscapesYou, or your architectThe authority having jurisdiction
Build it in fire-rated foliage (NFPA 701), an upgrade at extra cost over our standard UV-stabilized foliage.YesNoNo
Provide the NFPA 701 documentation for the fire-rated foliage, on request.YesNoNo
Advise on placement, so it respects Zone 0 near a building.YesNoNo
Confirm the occupancy, and whether the greenery is inside, outside or near an exit.NoYesNo
Ask the fire authority, or your architect’s code consultant, whether the decorative-material rules apply where it goes.NoYesNo
Keep the documentation in your building’s compliance file: the inspector who asks may not be the one who approved the install.NoYesNo
Review it, at plan review, a fire inspection or an event permit.NoNoYes
Decide.NoNoYes

The terms, plainly.

What the words on a fire submittal mean, each said once.

NFPA 701
The National Fire Protection Association’s Standard Methods of Fire Tests for Flame Propagation of Textiles and Films: a laboratory test of how a material behaves when a flame is applied and then removed.
Method 1 and Method 2
NFPA 701 has two test methods. Method 1 covers lighter fabrics such as drapes and curtains; Method 2 covers heavier materials, such as plastics, films and vinyl-coated products, which is why it is the one usually cited for artificial foliage. California’s Fire Code accepts Method 1 or 2, as appropriate, or NFPA 289 (section 807.4.1).
Standard and fire-rated (FR)
Standard foliage is UV-stabilized for outdoor sun. Fire-rated foliage (NFPA 701) is an upgrade at extra cost, with documentation on request.
Fire-retardant
The material resists propagating flame; it can still burn. It is the honest word for fire-rated foliage.
Fireproof
Not a foliage rating. No foliage product is fireproof: sustained flame will damage any artificial plant.
Fire documentation
The paperwork a plan reviewer or fire marshal asks for. For our fire-rated foliage, it is available on request; standard foliage is not fire-rated, and for other foliage it depends on the product.
Authority having jurisdiction (AHJ)
The local fire authority that interprets and enforces the California Fire Code for your address. It makes the final call.
Zone 0
The ember-resistant zone within 5 feet of a structure. California’s Board of Forestry adopted emergency Zone 0 regulations in August 2026 for State Responsibility Areas and Very High Fire Hazard Severity Zones, then withdrew them from Office of Administrative Law review on September 8, 2026; as of October 2026 they are not in effect. Fire-rated greenery is not fireproof, so we keep it out of that zone anyway.

Send us your project.

Tell us the property, where the foliage goes and who reviews it: a fire marshal, a plan reviewer, the owner’s team. Photos help; add them here or we’ll ask. Fire-rated foliage (NFPA 701) is an upgrade at extra cost, with documentation on request.

(760) 978-7335
  1. A quick callAbout your wall and what it needs to hide.
  2. Online site reviewA render on your photo, with an intro estimate.
  3. Free site visitIn Southern California, for the final estimate. No obligation.

No photos or measurements needed to start. A rough idea is enough.

Fields marked * are required

What would you like built?

Height, length, what it needs to hide.

Add photos0 of 2

Up to 2 photos. A wide shot of the whole wall helps most. Have more? Send the rest when we get back to you.

By sending, you agree to our Terms of Service and Privacy Policy, and that we may call, text or email you about your request.

Book a 15-min call

Fire-rating questions we hear.

Which of your foliage is fire-rated?

None as standard. Standard foliage, the nine mats in our library (Oasis, Boxwood, Ficus, Succulent, Fern, Vallum FRX, Moss, Lush Long Leaf and Dragon Leaf), is UV-stabilized for outdoor sun. Fire-rated foliage (NFPA 701) is an upgrade at extra cost, with documentation on request. Tell us the mat you want and we will say plainly whether it comes fire-rated. More foliage is available on request; its fire documentation depends on the product.

Do you provide the fire-test documentation?

Yes, for fire-rated foliage, an upgrade at extra cost: the NFPA 701 documentation is available on request. Standard foliage is UV-stabilized and not fire-rated. If your plan reviewer or fire marshal asks for something else, tell us and we will say plainly whether we have it. More foliage is available on request; its fire documentation depends on the product. Requirements still vary by property type, installation location and AHJ review.

What does passing NFPA 701 Method 2 mean?

NFPA 701 is a laboratory flame-propagation test. Method 2 covers the heavier plastics, films, and coated panels used in artificial foliage; the California Fire Code accepts Method 1 or 2, as appropriate. Passing means the material self-extinguished within the standard’s limits when the flame source was removed, with limited char length and no lasting flaming drips. It is a fire-retardant rating, never a claim that the product is fireproof.

Is fire-rated artificial greenery fireproof?

No. No foliage product is fireproof. Sustained flame exposure will damage any artificial plant. The honest term is fire-retardant: the material resists propagating flame. The local fire authority having jurisdiction makes the final call for your address.

Will the fire marshal approve it?

That is their decision, not ours. The authority having jurisdiction decides for your address and placement, and nobody can promise approval in advance. What we do is provide the NFPA 701 documentation for fire-rated foliage on request, so you have it when they ask.

Can fire-rated greenery go right up against the building in a fire zone?

We keep it out of the 5 feet around a structure in a fire zone. California’s Board of Forestry adopted emergency Zone 0 regulations for that band in August 2026, for State Responsibility Areas and Very High Fire Hazard Severity Zones, then withdrew them from Office of Administrative Law review on September 8, 2026; as of October 2026 they are not in effect. Fire-retardant foliage is not fireproof, so we place it outside that band anyway, and you confirm the layout with your fire authority.

Who installs it?

Geranium Street USA, Inc., CSLB #955154. Califauxscapes is the California installation division of Geranium Street USA, Inc.

What does it cost?

Material, from $18 per sq ft for a living wall; from $99 per linear ft for a privacy hedge on your fence or wall, or from $200 per linear ft freestanding at 6 ft × 7 in; from $65 per linear ft for a 3 ft fence extension with foliage on one side; and from $699 a unit for a privacy wall, 4 ft × 4 ft on the standard composite base. Prices are for standard UV-stabilized foliage; fire-rated foliage costs extra. Fire-rated foliage (NFPA 701) is an upgrade on every system, and its cost is not in those figures. Installation is priced to your site and confirmed at a free, no-obligation site visit in Southern California.

Straight answers.

Fire-rated artificial hedge and living wall installation in California

For hotels, restaurants, casinos, offices, malls and multifamily properties whose artificial greenery has to clear a fire marshal or plan reviewer (the AHJ): we design and install artificial hedges and living walls in fire-rated foliage.

Standard foliage is UV-stabilized for outdoor sun. Fire-rated foliage (NFPA 701) is an upgrade at extra cost, with documentation on request. More foliage is available on request; fire documentation depends on the product. Fire-rated material is fire-retardant, never fireproof, and the authority having jurisdiction makes the final call. Califauxscapes is the California installation division of Geranium Street USA, Inc. Installation services are provided by Geranium Street USA, Inc., CSLB #955154. Serving Los Angeles County, San Diego County, Orange County, the San Francisco Bay Area, and the Inland Empire.

What NFPA 701 Method 2 means, and the specs architects ask about

NFPA 701 is a laboratory flame-propagation test, and Method 2 is the protocol usually cited for the heavier plastics, films, and coated panels used in artificial foliage.

A product that passes self-extinguished within the standard’s limits once the flame source was removed: a laboratory result, not a promise that it cannot burn.

When architects and plan reviewers dig deeper, they sometimes reference related specifications such as California Title 19 for decorative materials and ASTM E84 for the surface burning characteristics of building materials. The NFPA 701 documentation for our fire-rated foliage, an upgrade at extra cost, is available on request; standard foliage is UV-stabilized and not fire-rated, and for other foliage, fire documentation depends on the product. Fire-rated material is fire-retardant, never fireproof, and the local fire authority having jurisdiction makes the final call.

An honest note about Zone 0

California’s Board of Forestry adopted emergency Zone 0 regulations in August 2026 for the 5 feet around a structure in State Responsibility Areas and Very High Fire Hazard Severity Zones, then withdrew them from Office of Administrative Law review on September 8, 2026; as of October 2026 they are not in effect. Fire-rated greenery is not fireproof, so we keep foliage out of that 5 ft band anyway, and you confirm the layout with your fire authority.

Why the documented product is different

Standard vs. fire-rated
Standard foliage against fire-rated foliage, an upgrade at extra cost
WhatStandard foliageFire-rated foliage
DocumentationNo fire-test paperworkNFPA 701 documentation, on request
RatingUV-stabilized, not fire-ratedFire-rated to NFPA 701
PriceThe released starting pricesAn upgrade at extra cost
Typical fitPrivate backyards and exterior areas with no assembly-occupancy reviewHotels, restaurants, casinos, offices, malls, and multifamily interiors under AHJ review
Who decidesThe authority having jurisdictionThe authority having jurisdiction

Bring the fire marshal a paper trail, not a problem

Tell us the occupancy, where the greenery goes, and whether you are in plan review or already flagged. We will scope it in fire-rated foliage (NFPA 701), an upgrade at extra cost, with the documentation on request. Installation services are provided by Geranium Street USA, Inc., CSLB #955154.

Documents and links.

The real documents a reviewer asks about, and the pages around this one.

Califauxscapes is the California installation division of Geranium Street USA, Inc. Installation services are provided by Geranium Street USA, Inc., CSLB #955154.