Skip to content

Artificial landscaping for residential properties

Four homes, four mounts: posts on a Brentwood hillside, plates in a jacuzzi deck, a Downtown LA block wall and a San Diego backyard wall.

What it costs

What homeowners ask for.

Sector sheet

A tall artificial privacy hedge running the length of a Brentwood deck, blocking the view from the neighbors

Brentwood hillside deck, 2019

From our case study: On the south side, the privacy hedge created a clear boundary between the homeowner’s seating area and the neighbor’s space.

Read the case study: Brentwood privacy hedge installation: 600 sq ft of UV-resistant artificial hedges

Set against the jobs we built for them. A mark means the job’s own case study says so; choose one to read it.

What homeowners ask for, against four jobs we built for residential properties. A mark: the job’s case study says so.
Asked forBrentwood hillsideHillside deckBrentwood jacuzziJacuzzi deckDowntown LAStreet-side patioSan DiegoBackyard wall
Privacy from neighbors and the streetNot in this case study
Looks built in, not added on
Mounted to suit what is there
Little or no watering and trimming
Sector
Residential properties
Job files
Four, each with its own case study
Installed by
Geranium Street USA, Inc., CSLB #955154
Site visit
Free and no obligation, in Southern California

In their words.

“What we were seeking after five years, was finished and completed in a half a day. Highly recommend!”

Laura McDonnell, Homeowner
The whole review

“We had been looking for a privacy solution for our back deck for a few years. We have 6 foot high railings that look out onto our neighbor’s roof and onto the house that’s on the back lot of our property. Califauxscapes provided such a lovely neutral boxwood hedge to give our deck the privacy we were seeking. Off of our other small porch we put up a faux artificial living wall that has given such depth to the space and has provided a lovely hedge to look at daily. The staff at Geranium Street were delightful to work with and very efficient in their installation. What we were seeking after five years, was finished and completed in a half a day. Highly recommend!”

The paperwork.

What you get in writing, said plainly.

Documentation, license, warranty, estimates and installation for residential properties
Fire rating

Fire-rated foliage (NFPA 701): an upgrade at extra cost

Standard foliage is UV-stabilized, not fire-rated. The documentation is available on request. More foliage is available on request; fire documentation depends on the product. Requirements still vary by property type, installation location and AHJ review.

Foliage

Nine mats in our library, every one UV-stabilized as standard

Oasis, Boxwood, Ficus, Succulent, Fern, Vallum FRX, Moss, Lush Long Leaf and Dragon Leaf (Geranium Street lookbook FM.2026).

License

Installation by Geranium Street USA, Inc., CSLB #955154

Califauxscapes is the California installation division of Geranium Street USA, Inc.

Warranty

3–5 year limited UV fading warranty (varies by product line) on qualifying products and 1-year installation workmanship warranty.

Coverage is limited and subject to product eligibility and installation scope; ask us what it covers before you buy.

Expected outdoor life

5–7+ years for the mats (Geranium Street lookbook)

An expectation of the mats outdoors, not a warranty term.

Estimates

A render on your photo with an intro estimate, then the final estimate after a free site visit

Installation is priced to your site. Confirmed at a free, no-obligation site visit in Southern California.

Install

After hours or overnight when access and size allow

Decided with you at the site visit.

What it costs.

The released starting prices of the privacy hedge, the fence extension and the living wall, the systems our residential jobs were built with, and what each price is for.

  1. Privacy hedge

    Hedge-style privacy, the day it is installed, for patios, boundaries, and guest-facing edges.

    Material, from $99 per linear ft on your fence or wall

    On your fence or wall: 6 ft tall, single-sided, about 2 to 3 in deep. Freestanding: from $200 per linear ft at 6 ft × 7 in, on posts set in concrete. Taller or shorter is priced by height from the 6 ft rate.

    Built for residential properties
  2. Fence extension

    Add privacy height to an existing fence without a full rebuild.

    Material, from $65 per linear ft

    For a 3 ft extension on the fence you have, with foliage on one side. Taller or shorter is priced by height from the 3 ft rate. Foliage on both sides costs more and is priced to your site.

    Built for residential properties
  3. Living wall

    Controlled vertical greenery for feature walls, entries, and amenity spaces.

    Material, from $18 per sq ft

    Fully custom, per square foot of wall.

    Built for residential properties

Installation is priced to your site, starting from what is there now: a fence, a wall or open ground; see what moves it.

Confirmed at a free, no-obligation site visit in Southern California.

All four, side by side

Send us your yard.

Tell us what it needs to hide and what is there now: a fence, a wall, open ground, a deck. Add a photo from where you sit, or we’ll ask for one. We reply with next steps.

(760) 978-7335
  1. A quick callAbout your wall and what it needs to hide.
  2. Online site reviewA render on your photo, with an intro estimate.
  3. Free site visitIn Southern California, for the final estimate. No obligation.

No photos or measurements needed to start. A rough idea is enough.

Fields marked * are required

What would you like built?

Material, from $99 per linear ft on your fence or wall, or from $200 per linear ft freestanding at 6 ft × 7 in, + installation, priced to your site.

Height, length, what it needs to hide.

Add photos0 of 2

Up to 2 photos. A wide shot of the whole wall helps most. Have more? Send the rest when we get back to you.

By sending, you agree to our Terms of Service and Privacy Policy, and that we may call, text or email you about your request.

Book a 15-min call

Common questions about residential properties.

How long does a residential install take?

On our residential case studies: three weeks for the Brentwood hillside deck, two weeks for the Downtown LA block wall, and three weeks for the San Diego backyard wall.

Do I need a fence or a wall to mount it on?

No. A hedge can mount to a fence or wall you keep, and a fence extension, fixed to the face of one, adds height above it. With no fence at all, we set square tube posts in concrete and mount hedge sheets to them, as at the Brentwood hillside deck. A privacy wall stands on its own base.

What does it cost for residential properties?

Material, from $99 per linear ft for a privacy hedge on your fence or wall, or from $200 per linear ft freestanding at 6 ft × 7 in; from $65 per linear ft for a 3 ft fence extension with foliage on one side (both sides, the standard build, is priced to your site); from $18 per sq ft for a living wall, fully custom; and from $699 a unit for a privacy wall, 4 ft × 4 ft on the standard composite base (casters or weighted bases are an extra charge, priced to your site). Installation is priced to your site and confirmed at a free, no-obligation site visit in Southern California.

Do you provide fire documentation?

Yes, for fire-rated foliage, an upgrade at extra cost: the NFPA 701 documentation is available on request. Standard foliage is UV-stabilized and not fire-rated. More foliage is available on request; its fire documentation depends on the product. Requirements still vary by property type, installation location and AHJ review.

What happens after we get in touch?

A quick call, then an online site review: a render on your photo, with an intro estimate. If it works for you, a free, no-obligation site visit in Southern California for the final estimate. Then production and install, after hours or overnight when access and size allow.

Can residential projects mix multiple product types?

Yes. A private-property scope can combine privacy hedges, fence extensions, and selective wall features based on visibility, architecture, and where privacy is actually needed.

Will this remove all yard maintenance?

It usually reduces routine landscaping effort in treated areas, but periodic cleaning and inspections are still recommended.

Do I need permits for privacy upgrades?

It depends on local jurisdiction, fence height, and HOA rules. Requirements should be confirmed before final scope.

Is a site visit required before final pricing?

A site visit is typically needed to verify dimensions, substrate condition, and installation constraints.

The residential reference.

At a glance

Private clients, architects, designers, and builders weigh residential artificial landscaping on privacy, architectural fit, and long-term upkeep.

Privacy, screening, and finish-control systems for private homes.

Califauxscapes designs, builds and installs privacy hedges, fence extensions, living walls and privacy walls for residential properties in California. Our residential case studies: Brentwood hillside deck (hillside deck, Brentwood, 2019), Brentwood jacuzzi deck (jacuzzi deck, Brentwood, 2020), Downtown LA block wall (street-side patio, Los Angeles, 2019) and San Diego backyard (backyard wall, San Diego, 2021). Material, from $99 per linear ft for a privacy hedge on your fence or wall, or from $200 per linear ft freestanding at 6 ft × 7 in, from $65 per linear ft for a fence extension, foliage on one side and from $18 per sq ft for a living wall, each at its released configuration, in standard UV-stabilized foliage; installation is priced to the site, with a free, no-obligation site visit in Southern California for the final estimate. Fire-rated foliage (NFPA 701) is an upgrade at extra cost, with the documentation on request, and installation is by Geranium Street USA, Inc., CSLB #955154. Serving Los Angeles County, San Diego County, Orange County, the San Francisco Bay Area, and the Inland Empire.

Why this industry profile matters

For private properties, artificial landscaping can be a practical way to improve privacy and visual consistency in selected areas while reducing the irrigation and trimming burden that often comes with live screening.

Residential scopes usually begin with privacy, finish quality, and how the system will read from the most important views around the property. Planning typically starts with sightlines, existing wall or fence conditions, and how the upgrade should integrate with the architecture rather than compete with it.

Who we work with

Private clients, architects, designers, and builders working on entries, patios, pool zones, and perimeter privacy.

Where it tends to fit

Best when the property needs privacy or a cleaner green edge without depending on live growth to fill in over time.

What usually weakens scope

Weak scopes usually skip the important views, the existing substrate, or how the finish should read against the architecture.

Key benefits by use context

Sightline-led privacy
Layout can be tuned to the views that matter most, instead of overbuilding every edge of the property.
Architectural continuity
Tone, density, and framing can be selected to sit cleanly against stucco, stone, wood, and metal palettes.
Lower routine upkeep
It can reduce irrigation and frequent trimming tasks in the upgraded zones.
Selective scope control
Backyards, side yards, entries, and pool zones can often be prioritized in stages to align with budget and timing.

Residential clients usually care about control, not just greenery

High-end residential work typically starts with a very practical question: which views need to feel more private or more finished, and which ones do not.

Owners are usually not trying to turn the whole property into an artificial landscape environment. They are trying to improve the edges that affect comfort, resale perception, and day-to-day use the most. That is why strong residential scopes tend to focus on patios, pool zones, shared lot lines, side yards, and entries rather than applying the same solution everywhere.

Artificial systems can be a better fit in those zones when the owner wants immediate privacy and a more predictable finished look without depending on a live hedge to fill in over time. The real value is not just less trimming or irrigation. It is the ability to create a controlled result in the exact area that matters most, then keep that edge stable through the year. For many residential clients, that reliability is what justifies the upgrade.

The best residential recommendations stay tied to the architecture

A residential installation should not feel like a separate overlay that was added after the real design decisions were made.

The best work looks resolved because the height, density, and material direction were selected against the architecture, hardscape, and outdoor lifestyle of the property. A privacy hedge might be perfect beside a pool and completely wrong for a formal entry. A privacy wall might solve a tight side yard more cleanly than any hedge profile could.

Related residential project

Brentwood privacy hedge installation: 600 sq ft of UV-resistant artificial hedges

This case study matters because it shows how Califauxscapes solves privacy and finish issues on a real residential property where the installation has to support both daily use and long-term visual consistency.

Six hundred square feet of UV-resistant hedges covered an exposed hillside and restored privacy to a Brentwood deck.

How residential teams usually decide where artificial systems belong

Residential decisions usually get clearer once the owner decides whether the project is about immediate privacy, a stronger finished edge, or a more durable alternative to a maintenance-heavy planted zone.
Choose privacy hedges for softness
Best when the property wants a greener, softer visual edge on patios, pools, and yard boundaries. If the layout is tight or more architectural control is needed, privacy walls may be stronger.
Choose fence extensions for efficiency
Best when the fence can be upgraded instead of rebuilt and the main issue is height or added screening. If the owner wants a cleaner rework of the whole edge, other systems may be worth comparing.
Choose privacy walls for control
Best when the project needs a more precise, compact, or architectural screen. If the owner wants a more landscape-forward look, hedges often feel more natural.

From our case studies

Every mark on the sheet, as our case study for that job says it: what residential properties asked for, and the jobs that did it.

Privacy from neighbors and the street

  • Brentwood hillside deck: On the south side, the privacy hedge created a clear boundary between the homeowner’s seating area and the neighbor’s space.
  • Brentwood jacuzzi deck: The homeowner got privacy around the jacuzzi right away.
  • Downtown LA block wall: The homeowner can sit outside, eat dinner, or have guests over without feeling like she’s on display to the street.

Looks built in, not added on

  • Brentwood hillside deck: The hedge looks permanent and intentional, not temporary or makeshift.
  • Brentwood jacuzzi deck: That’s what made it feel built-in: straight lines, consistent height, and fewer gaps.
  • Downtown LA block wall: The artificial boxwood creates a dense, consistent green barrier that looks like a well-maintained hedge from both sides.
  • San Diego backyard: What used to be a flat, bare surface now reads as a green backdrop that ties the whole outdoor space together.

Mounted to suit what is there

  • Brentwood hillside deck: We also planned the attachment method upfront: using galvanized square tube posts set in concrete on the hillside to mount hedge panels so they’d be secure and visually seamless.
  • Brentwood jacuzzi deck: Instead of a light-duty setup, we designed a mounting approach with custom plates drilled into the decking so the hedge panels would be properly supported and lined up.
  • Downtown LA block wall: Califauxscapes designed thin-profile artificial boxwood panels that sit on top of the block wall and attach to the metal railing.
  • San Diego backyard: The wall mounts directly to the existing surface, so there’s no structural work involved beyond securing the panels.

Little or no watering and trimming

Limited warranty on UV fading and installation workmanship

3–5 year limited UV fading warranty (varies by product line) on qualifying products and 1-year installation workmanship warranty.

Coverage is limited and subject to product eligibility and installation scope; ask us what it covers before you buy.

Planning a project for residential properties?

Bring the site condition, the property type, and the main design objective. We can help clarify the right system, the likely installation path, and the next step for scope review.